New from Hydraram
Published: 19/3, 2019
During Bauma 2019, Hydraram will present its completely renewed line of demolition equipment. The HCC series demolition crushers, HCS series combi cutters, HSS series scrap shears, HFP series concrete pulverizers, HFP-M series concrete pulverizers with integrated magnet, HRP series rotatable concrete pulverizers and HDG series demolition and sorting grabs have all been updated. The attachments have gained more strength and Hydraram has improved the open/close cycle times, in part by mounting speed valves on the cylinders. By using hydraulic cylinders with higher working pressures, attachment power has been increased by as much as 35%. The HCC series features new changeable penetration teeth that were already applied in the HCS series. These teeth have a better penetrating ability in concrete, which has further optimized the crushers cracking force. The new HCC series can be equipped with an automatic lubrication system. In addition to the standard jaws, high-penetration HPJ jaws have been developed for the HCC series to transfer even more force to the object being demolished. Hydraram HPJ jaws have up to 30% higher penetration force than the standard HCC jaws. Hydraram developed the HFP series pulverizers with integrated battery-powered 24V magnet. No additional alternator is needed. The magnet function can be switched on by the excavator's operator to easily collect the remaining concrete reinforcement steel at the construction site during concrete crushing. The magnets are equipped with a quick release system, so that the metal is immediately ejected as soon as the magnet is switched off. The HDG series of demolition and sorting grabs has been extended to 25 models ranging from 165 lb (75 kg) to nearly 3,100 lb (14,000kg) for 1t to 250t excavators. The new HDG series features more powerful inner cylinders with end damping, and has only four turn / hinge points and two reinforced rotation motors for greater torque.